Free Shipping

on vapes within the U.S.

Secure Shopping

with discreet packaging

Questions?

Call (719) 570-9928

Follow us

The Super Surfer Vaporizer is the world’s most versatile desktop vaporizer. 
It can be used with a whip set-up, a bag set-up, an aroma top, and a variety of filtration and cooling accessories.


When you first plug in the Super Surfer for your first use, turn the heat (left dial) on high for about 5 minutes to burn off any residue from the production process. After 5 minutes, turn the knob back down to about the1 or 2 o’clock position (just right of center) to begin vaporizing. 

CAUTION: The heating element & surrounding glass can get VERY HOT!
 

 


 

What's In The Bag


  1. Super Surfer Vaporizer assembled with two hand-blown glass knobs and a Spherical Glass Heater Cover
  2. Padded Storage Bag made of a hemp and polyester blend we like to call "hempster"
  3. Roll of food grade plastic Vapor Bags
  4. Glass Aroma Top scented oil and wax melt diffuser (includes wax melt sample)
  5. Replacement Screens for the Whip Wand and the Vapor Bag Bowl
  6. Vapor Bag Mouthpiece
  7. Vapor Bag Bowl
  8. Vapor Bag Wand
  9. Vapor Bag Seal
  10. Whip Mouthpiece
  11. Vapor Bag Sleeve
  12. Whip Wand with Bowl
  13. Whip Tubing made of food grade vinyl
  14. Stainless Steel Pick to stir your herbs or replace the screens
  15. Hands Free Attachment to secure the Whip Wand or Vapor Bag Bowl to the heater cover
  16. Sick Clip to seal and secure ground glass connections
  17. Ceramic Flavor Discs for vaporizing essential oils and concentrates
    

 

Using The Super Surfer


First Time Use

When you plug in the Super Surfer for your first use, turn the heat (left dial)  on high - turn all the way clockwise - for about 5 minutes to burn off any possible residue from the production process. After 5 minutes, turn the knob back down to about the 1 or 2 o’clock position (just right of center) to begin vaporizing.


After The First Use

Each time you plug your Super Surfer into a wall outlet the light will come on in "demo mode" setting, which makes it's way through every available light setting. You can push the light button to cycle through different settings. Press and hold the button for 3 seconds to turn the lights off. Turn on the Super Surfer to the desired power by rotating the left knob fully clockwise and let the unit warm up for two minutes. The ceramic heating element will glow orange, but the glass heater cover also needs to heat. Meanwhile, prepare and pack the herbs. 


Preparing The herbs

Break up or grind your herbs with a grinder, scissors, or your fingers – just make certain the herbs is broken up and fluffy. 


Assembling The Whip And The Vapor Bag


Whip Set-up:

  • Attach your Whip Mouthpiece and Whip Wand with Bowl to the tubing. The whip can be used manually, or you can attach it to the glass heater cover with the hands free attachment for hands-free use.


     

Vapor Bag Set-up:

   
  • Close off Bag. Cut a length of bag (18”to 22” is typical) and seal one end by twisting & folding it over, then sliding it through the Vapor Bag Seal.
     


  • Attach Sleeve to Bag. Slide the pinched end of the Vapor Bag Sleeve over the open end of the bag until about 1-2 inches of bag extends outside the other end of the tube.


  • Attach Bag to Wand. Push the tapered end of the Vapor Bag Wand into the bag until the sleeve starts to tighten. 



  • Seal off Bag and Wand. Cut along the edge of the sleeve to remove excess bag. Then pull the main portion of the bag while pushing in the wand for a tight seal and clean look.

   


 

Packing The Wand Or The Vapor Bag Bowl

Loosely cover the screen with about 1/4th to 1/2 inch of herbs. It’s important to not pack too tightly so the heat flows through the bowl evenly. As you gain experience with the Super, you’ll learn that a little bit goes a long way. Never fill the bowl area past the clear glass and into the ground glass, as it could very easily fall into the vaporizer. 

As you vape you’ll need to stir occasionally to ensure the herbs are vaporized evenly.  


Setting the Desired Heat

After the ceramic heating element has warmed up at maximum heat for two to five minutes, turn the knob back down to about the 1 or 2 o’clock position. During your first session there will be a little bit of trial and error while dialing in the heat setting to fit your personal inhale speed. The 2 o’clock position is common for how most people tend to inhale. If you inhale fast and you aren’t getting enough vapor at this position, turn the heat up. If you inhale slower turn the heat down. The element cools as air passes by it, so your inhale speed directly impacts the amount of vapor produced. In general, a slower inhale produces more vapor, while a faster inhale produces less vapor. 

Avoid excessive heat or the air could be hot enough to combust the herbs. If the herbs turn black, it’s an indication combustion is occurring – and that’s not what you want. Turn the heat down!

 
Changing the Light Setting

           
 
  • Initial Plug In - Demo Mode

  • 1 Click - Medium Blink

  • 2 Clicks - Fast Blink

  • 3 Clicks - Red

  • 4 Clicks - Green

  • 5 Clicks - Blue

  • 6 Clicks - Yellow/Green

              
  • 7 Clicks - Turquoise

  • 8 Clicks - Purple

  • 9 Clicks - Pale Blue

  • 10 Clicks - Slow Fade

  • 11 Clicks - Back to the Medium Blink to restart the cycle

  • Press and Hold - Power On/Off


Using the Vapor Bag

Fill the Vapor Bag Bowl with about 1/4 to ½ inch of ground herbs, and connect it to the Vapor Bag Wand - you can use the optional clip if you want. You can then manually hold the Vapor Bag Bowl to the Glass heater cover of the Super Surfer or attach it with the Hands Free Attachment. Set the heat (left dial) to about 1 or 2 o’clock position (just right of center), then turn the fan (right dial) all the way up until the bag is completely full. Keep the fan on while removing the filled bag to prevent blow-back. You can experiment with different heat and fan settings to produce the desired amount of vapor.

Note: a Sick Clip is included for those who wish to secure the Bag Wand to the Bag Bowl and/or the Bag Wand to the mouthpiece.

Once your bag is full, keep the fan on while separating the wand from the Vapor Bag Bowl to prevent blow-back. Never remove the bowl first, as this can also cause blow-back from the change in pressure. Attach the Vapor Bag Mouthpiece onto the ground joint of the wand and clip it in place with the Sick Clip. Take a deep breath and enjoy!


How the Super Surfer Works

Unlike pipes, the vaporizer allows you to inhale herbs without combustion. The Super Surfer uses hot air to heat the herbs until the active ingredients boil, vaporize, then are suspended in the air. Instead of burning ingredients out of the herbs, the Super releases the materials contained in the herbs with no burning and without producing the odors and associated waste products produced by smoking.

The Super's heater element can be left on for an extended period of time as long as it is supervised. We recommend turning off the fan and lights when not in active use.

The glass wand or vapor bag bowl can be packed with about 1/2 inch of herbs. When the packed wand is placed against the Super’s glass heater cover and the user inhales, a vaporous mist is ingested. When the Vapor Bag Bowl is connected to the heater cover and the fan is turned all the way on, the vaporous mist fills the bag and becomes much more concentrated. The mist is easy on the lungs because the user isn’t inhaling smoke or any of the other nasty byproducts of combustion – a feature ex-smokers will greatly appreciate.

 
WARNING!  Failure to follow safety recommendations could result in serious injury or property damage.

• During operation, Super Surfer Herbal Vaporizer components get sufficiently hot to cause combustion and severe burns! Never touch the ceramic heater, glass heater cover, hands free attachment, or other surface inside the Super once powered on. Always allow a cool-down before touching any Super components after turning the device off.

• Keep the Super out of reach of children and away from pets. Never leave unattended with a child in the vicinity.

• Keep the Super away from combustibles such as paper, fabric, plastic and anything else you think could catch fire.

• Never let hair or loose clothing come in contact with the heat source.

• Pay attention to power cord placement, and never put the Super where it could be tipped or could fall over.

• Never leave the Aroma Top on the Super when it could be tipped or knocked over. Hot oil can burn and stain.


 

Changing the Screen 


With use, the screens will become clogged and will require occasional replacement. The first time you replace a screen it might take a bit longer, but soon you'll get the hang of it and be changing screens in seconds. Before beginning, you might wish to see a short video of the screen-replacement procedure:
       


Remove existing screen

Using the supplied pick, reach into the tube and hook the screen, then pull it upward from its seated position inside the bowl. Or, use a longer rod to push the screen out from the opposite end.
 


Install Replacement Screen

  • Cup the screen by pressing it into your palm with a finger.  Place the screen against the interior wall.
     
  • Press the tip of the pick against the screen and use the pick to push the screen into the tube toward the bulge of the bowl.
     
  • When the screen is positioned at the bulge, use the pick to flip the screen away from the wall and pop it into the bulge. When the screen is flipped, part of the screen pops into the bulge.
     
  • Use the pick to press the screen's perimeter to finish popping the screen into the basket.
       

  


 

Hands-Free Attachment


Mate the Whip Spherical Wand or Vapor Bag Bowl to the heater cover.
Slide the Hands Free Attachment around the wand or Vapor Bag Bowl, inside the housing. It should be snug, but still allow movement.
 

 


 

Glass Aroma Top


Top off your vape with a glass Aroma Top! Add a few wax melts or essential oils to fill your home with a wonderful, clean scent. Mix and match wax melts for a custom aroma of your very own!
(*note: does not work with Hands Free Attachment in place)
 

 


 

Heater Cover Info


If you need to clean or remove your heater cover for any reason, unplug your Super Surfer Vaporizer and let it cool for AT LEAST 30 minutes before attempting to touch the heater cover. After 30 minutes, hold your hand directly above the unit and feel for any heat still emanating from the it. If you still feel heat, wait an additional 30 minutes or until you are completely sure the unit is cool enough to touch. 
 




Changing/Cleaning your HC

Whether you want to remove your heater cover for transit, or clean it after extensive use, we have made the process simple!  WIth our current heater stand, its just a matter of pulling up on the (COMPLETELY COOLED!) heater cover.  A ‘slight’ side-to-side motion might be necessary, but if you feel any resistance at all, do not force it!  You are putting force on glass, and too much could break it and cause injury.   

To clean your heater cover, use a mild soap and water combo. For stubborn build-up, we suggest soaking in Isopropyl alcohol, and removing the buildup with a pipe cleaner or Q-Tip.   

              
 
 

 

TIPS & HINTS
 

  • We recommend that you start with a low temperature to begin with, and if you do not see vapor, turn it up slightly; wait 30 seconds and try again,  If you still see no vapors, repeat until vapors are visible on exhale.
  • When putting together your bag set-up, be careful that the wand does not poke through the bag as you are sliding it into the vapor bag sleeve. Additionally, the wand can sometimes not create a tight enough seal with the bag and sleeve, so you may need to twist the wand while putting it into the vapor bag sleeve.
  • If the flow seems restricted, make sure the herbs is not packed too tightly in the wand.  Stir with included pick to loosen.
  • Screens can become clogged over time, causing issues with airflow, Clean or replace your screen regularly to maintain proper airflow.
  • Filling a Vapor Bag causes the vapor to be far more concentrated than it would be when using the whip, so be careful and take slower hits until you experience how the difference will affect you.
  • Your personal rate of draw as you inhale through the whip can control the temperature slightly. Drawing faster causes the air to move quickly over the heating element, so it has less time to heat up. Drawing slower has the opposite effect. If you find combustion occurring, either turn down your temperature, or draw slightly faster. Conversely, if you do not feel you are reaching vaporization, either turn up the temperature slightly, or draw slower.  
  • In no time you will find your ‘sweet spot’ that will allow you to draw at a comfortable rate while still achieving thick and tasty vapors!
     

 

Warranty & Service


Click here to view the complete warranty details.

The Silver Surfer Vaporizer, Super Surfer Vaporizer, Da Buddha Vaporizer, Life Saber Vaporizer, SideKick Vaporizer, and Elev8 Glass are not a medical devices and are
not intended to diagnose, treat, mitigate, cure or prevent any ailment, disease or other conditions. The 7th Floor Vaporizers are not intended to administer medicinal
or illegal products of any kind and are not intended for use with any substance that may affect the structure or any function of the body. If you have any health
problems consult your doctor or pharmacist before using. The Silver Surfer Vaporizer, Super Surfer Vaporizer, Da Buddha Vaporizer, Life Saber Vaporizer,
SideKick Vaporizer, and Elev8 Glass are not designed, nor intended for use with any material that is not lawful or may cause harm. The lawful and proper use of this
device is a condition of sale. Any improper use of any 7th Floor vaporizers voids the warranty. Any illegal use of these devices could subject the user to fines, penalties
and/or imprisonment under the law of your jurisdiction. All comments and testimonials presented, in any form, by customers are not and do not represent the opinions of the manufacturers.