Free Shipping

on vapes within the U.S.

Secure Shopping

with discreet packaging

Questions?

Call (719) 570-9928

Follow us
                     

Silver Surfer Collaborations

Silver Surfer Collaboration Parts

   

   
      SSV Housing   SSV Wands   SSV Knobs   SSV Mouthpieces    
 
Must be your own artwork.
We cannot use copyrighted material.

11" x 7" @ 300DPI
OR
3300px x 2100px

To download a template,
click here
 
Design the wand how you would like, and send it to us to finish. We use a special 19mm joint and a spherical joint that requires a precise meriah to hold the screen, so just leave the joint end open.

The hose end must be opened to 10-11mm inner-diameter. Any smaller and the tubing will not go in, any bigger and it slips out.
 
Your knob can be anything you like, but the base must have a push so we can weld the dimmer attachment to it.
The push diameter needs to be 10.5mm to 12mm and about 8mm deep.
 
Any shape and style you like. The end that goes into our tubing must be 9-12mm in
outer diameter.
   
                   
                   
  SSV Heater Covers                
 
You can make any marble or creature you like, and we will attach it to the heater cover so that it fits inside the vape.
               
                   
 
 

Super Surfer Collaborations

Super Surfer Collaboration Parts

   

   
  Super Surfer Housing   Super Surfer Wands   Super Surfer Knobs   Super Surfer Mouthpieces    
 
Must be your own artwork.
We cannot use copyrighted material.

11" x 7" @ 300DPI
OR
3300px x 2100px

To download a template,
click here
 
Design the wand how you would like, and send it to us to finish. We use a special 19mm joint and a spherical joint that requires a precise meriah to hold the screen, so just leave the joint end open.

The hose end must be opened to 10-11mm inner-diameter. Any smaller and the tubing will not go in, any bigger and it slips out.
 
Your knob can be anything you like, but the base must have a push so we can weld the dimmer attachment to it.
The push diameter needs to be 10.5mm to 12mm and about 8mm deep. It's best to keep these shorter than SSV knobs, roughly at about 30-40mm tall.
 
Any shape and style you like. The end that goes into our tubing must be 9-12mm in
outer diameter.
   
                   
  Super Surfer Heater Covers   Super Surfer Vapor Bag Sleeves            
 
You can make any marble or creature you like, and we will attach it to the heater cover so that it fits inside the vape.
 
This is made on 26mm tubing, or it needs to become 26mm tubing with an 18mm inner-diameter.  One end is left open at 18mm and the other end is slightly pinched to be 15.5mm. It is very important to meet these measurements to the piece fits correctly.
           
                   
 
 

Life Saber Collaborations

Life Saber Collaboration Parts

   

   
  Life Saber Wands   Life Saber Knobs            
 
Design the wand how you would like, and send it to us to finish. We use a special 19mm joint and a spherical joint that requires a precise meriah to hold the screen, so just leave the joint end open.

We have found that 6” is on the short side and 11” is on the long side, so try to stay between those lengths.
 
Your knob can be anything you like, but the base must have a push so we can weld the dimmer attachment to it.
The push diameter needs to be 10.5mm to 12mm and about 8mm deep. It's best to keep these shorter than SSV knobs, roughly at about 30-40mm tall.
           
                   
                   
                   
                   
 
 

SideKick Collaborations

SideKick Collaboration Parts

   

   
  SideKick Mouthpieces   SideKick Bubblers   SideKick Attachments        
 
These must be made on 8mm tubing, and cannot be any longer than 96mm. The little bubble at the base of the mouthpiece cannot be any larger than 12.5mm.
 
These must be made on 8mm tubing, and the end  that goes into the vape must be at least 96mm before the bubbler starts.

Really the only requirement is that it works. We also suggest adding mariahs to allow the bubbles to disperse so they do not get sucked up.
 
Make on 8mm tubing with a stem length of 96mm, and go wild with your imagination after that.
       
                   
                   
                   
                   

The Silver Surfer Vaporizer, Super Surfer Vaporizer, Da Buddha Vaporizer, Life Saber Vaporizer, SideKick Vaporizer, and Elev8 Glass are not a medical devices and are
not intended to diagnose, treat, mitigate, cure or prevent any ailment, disease or other conditions. The 7th Floor Vaporizers are not intended to administer medicinal
or illegal products of any kind and are not intended for use with any substance that may affect the structure or any function of the body. If you have any health
problems consult your doctor or pharmacist before using. The Silver Surfer Vaporizer, Super Surfer Vaporizer, Da Buddha Vaporizer, Life Saber Vaporizer,
SideKick Vaporizer, and Elev8 Glass are not designed, nor intended for use with any material that is not lawful or may cause harm. The lawful and proper use of this
device is a condition of sale. Any improper use of any 7th Floor vaporizers voids the warranty. Any illegal use of these devices could subject the user to fines, penalties
and/or imprisonment under the law of your jurisdiction. All comments and testimonials presented, in any form, by customers are not and do not represent the opinions of the manufacturers.